FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 230VAC 1/40HP CWSE

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 230VAC 1/40HP CWSE
EVAPORATOR FAN MOTOR
FASCO
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 5001MS
FASCO Model# 71731560
Type: U73B1
2 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
THE 2  STUDS ARE 2-7/8"  ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 230
Hz: 60
RPM: 1550
HP: 1/40
AMPS: .65
ROTATION: CWSE (CLOCK WISE SHAFT END)
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 1-1/4"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 2-1/2"
ELECTRICAL
CORD IS ABOUT  14" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
$EVAPORATOR FAN MOTOR FASCO USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS. USED ON MANUFACTURERS LIKE; BOHN LARKIN HEATHCRAFT PEERLESS PERLICK LEER VOLLRATH TONKA, just to name a few............. INTERLINK PART# 5001MS FASCO Model# 71731560 Type: U73B1 2 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE THE 2 STUDS ARE 2-7/8" ON CENTER EACH STUD IS ABOUT 1/2" LONG CAN ALSO BE BELLY BAND MOUNTED. VOLTAGE: 230 Hz: 60 RPM: 1550 HP: 1/40 AMPS: .65 ROTATION: CWSE (CLOCK WISE SHAFT END) SHAFT SIZE: 5/16" SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 1-1/4" MOTOR DIAMETER: 3-3/8" MOTOR LENGTH: 2-1/2" ELECTRICAL CORD IS ABOUT 14" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING. THERMALLY PROTECTED NO OILING REQUIRED, PERMANENTLY LUBRICATED This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers. It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts. Simply match your motor to the specs in the to be sure it will work. If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
FAN MOTOR, EVAPORATOR, BOHN, LARKIN, HEATHCRAFT, PEERLESS, 230VAC 1/40HP CWSE
EVAPORATOR FAN MOTOR
FASCO
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 5001MS
FASCO Model# 71731560
Type: U73B1
2 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
THE 2  STUDS ARE 2-7/8"  ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 230
Hz: 60
RPM: 1550
HP: 1/40
AMPS: .65
ROTATION: CWSE (CLOCK WISE SHAFT END)
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 1-1/4"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 2-1/2"
ELECTRICAL
CORD IS ABOUT  14" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.
EVAPORATOR FAN MOTOR
FASCO
USED ON THE BLOWERS THAT GO IN WALK-IN COOLERS AND FREEZERS.
USED ON MANUFACTURERS LIKE;
BOHN
LARKIN
HEATHCRAFT
PEERLESS
PERLICK
LEER
VOLLRATH
TONKA, just to name a few.............
INTERLINK PART# 5001MS
FASCO Model# 71731560
Type: U73B1
2 STUDS FOR MOUNTING ARE ON THE SHAFT SIDE
THE 2  STUDS ARE 2-7/8"  ON CENTER
EACH STUD IS ABOUT 1/2" LONG
CAN ALSO BE BELLY BAND MOUNTED.
VOLTAGE: 230
Hz: 60
RPM: 1550
HP: 1/40
AMPS: .65
ROTATION: CWSE (CLOCK WISE SHAFT END)
SHAFT SIZE: 5/16"
SHAFT LENGTH FROM THE MOTOR TO SHAFT END: 1-1/4"
MOTOR DIAMETER: 3-3/8"
MOTOR LENGTH: 2-1/2"
ELECTRICAL
CORD IS ABOUT  14" LONG AND HAS A TWO PRONG CONNECTION (SEE PICTURE) THIS OF COURSE CAN BE CUT OFF FOR DIRECT WIRING.
THERMALLY PROTECTED
NO OILING REQUIRED, PERMANENTLY LUBRICATED
This is the evaporator fan motor is used on 90% of the "low profile" blower coils found in walk-in coolers and walk-in freezers.
It is important for you to know the voltage, the horsepower, the speed and the rotaion of your motor as well as how it mounts.
Simply match your motor to the specs in the to be sure it will work.
If you have any questions or feel you have a special motor then just ask me for a quote and I will get you a price.