ETC-111100 Electronic Temp Control 120/208/240 VAC ETC-111100-000 s/a ETC-111000

Description

The Ranco ETC is a microprocessor based temperature controller suitable for switching 120 Volts at up to 16 Amps for heating or cooling applications making it suitable for a wide range of applications.  This is a great universal controller for  any application where switching 120 Volts or temperatures outside that of a normal home thermostat is required.  The sensor with an 8' foot cable and instructions are included with the unit.
This unit can be used on a wide variety of applications: Coolers, Freezers, Wine Chillers, Greenhouses, Water Beds, Reptile tanks, Hot Tubs, just about anything in the -30-120 degree temp range.
The Ranco ETC-111100 is identical to the
ETC-111000
except that this unit also has a 0 to 10 Volt output that corresponds to the temperature reading.  This can be used with external monitoring systems.
Specifications:
Temperature Setpoint Range:  -30° to 220°F
Differential range: 1° to 30°F
Input Voltage: 120 VAC, 208, 240 VAC
Output:
0 to 10 Volts
Output Impedance:
1K Ohms
Pilot duty: 125VA at 120/208/240VAC
Sensor:  Thermistor, 2" long x 1/4" diameter with 8' cable (included)
Control Ambient Temperatures
Operating:  -20° to 140°
Storage: -40° to 176°
Ambient humidity:  0 to 95% RH, non-condensing
Enclosure:  NEMA 1
Dimensions: 6.52" high x 2.7" wide x 2.48" deep
Agency Approvals: UL listed, file E94419, Guide XAPX, CSA certified, file LR68340, class 4813 02
Relay Output Ratings - NO (NC)
120V
208/240V
Full load amps
16 (5.8) A
8 (2.9 A)
Locked rotor amps
96 (34.8) A
48 (17.4) A
Resistive amps
15 (5.8) A
8 (2.9) A
Horsepower
1 (1/4) HP
1 (1/4) HP