Browning Split Taper Pulley/Sprocket Bushing, 3/4 " Keyed Bore, H 3/4

Description

The picture shows all the sizes we have available.  This listing is for 1 ea. 3/4" bushing.
New out of box from a hardware store that went out of business.
The tapered
barrel on these bushings is split on both
sides,
allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock
bushings.
They're
for use with
split-tapered sprockets
and
pulleys
of the same bushing
style.
As you tighten the included
screws,
the bushing grips the shaft and pulls it into the sprocket or
pulley.
Lifetime Warranty - If this bushing ever fails Browning will replace it Free of charge.
Solid Flange & Double Split Barrel - Assures better concentricity to the shaft.
3/4" per Foot Taper on Barrel - Self locking taper provides the highest degree of mechanical locking product to product.
Bore Size: .
75  in
Outside Diameter:
2.5 in
Model Name:
H-Bushing_1_Master
Wrench Torque:
95 lb
Cap Screws (2) Size:
1/4 x 3/4
Bushing Type:
H
Total Length:
1.25 in
Length Through Bore:
1.25 in
Product Type:
Split Taper Bushing
Keyseat:
3/16 x 3/32
Material:
Sintered Steel, Malleable Iron or Ductile Iron